For VW MK6 Golf May 2010 – July 2013. For VW Golf Plus May 2010 – Jan 2014. For VW Eos May 2010 – 2016. For VW Caddy June 2013 – 2019. For VW Jetta Oct 2010 – Aug 2012 / April 2013 – December 2017. For VW Tiguan May 2010 – June 2015. For VW Touran May 2010 – June 2015. For VW Scirocco May 2010 – 2018. For Skoda MK2 Octavia May 2010 – 2013. For Skoda MK2 Superb May 2010 – Nov 2013. For SEAT Altea May 2010 – July 2015. For SEAT Leon May 2010 – Dec 2012. Number of Pins: 16 Pins. Placement on Vehicle: Front Side, Steering Column. Packaging Weight: 258 g. Packaging Sizes (cm): 20 x 20 x 11. Safely connects the cable between the steering wheel and the steering column, making the steering wheel turn smoothly and the horn function. It is also connected to the airbag, which can be ejected in time when the car is in a collision. Manufactured according to specifications of the adapted parts for a perfect match to the vehicle. Crafted from premium material, the conductor ensures superior electrical conductivity with low resistive losses. The installation position is underneath the steering wheel, it connects the electrical appliances on the steering wheel and the various. Electrical parts of the steering column. Please make sure to disconnect the battery and ensure the car is in an uncharged state before installing! Airbag parts, clock main spring, clock spring for audi a1. Front Side, Steering Column. 20 x 20 x 11. Vehicle Identification Number (VIN). Will this bulb fit my vehicle? A: We can match almost any vehicle to one of our bulb sizes. Q4: My bulbs won’t fit, help! A: Special bulb holder may be required. See if you can take the holder from the stock bulb. If not, let us know. The bulb size may be wrong, double check the item you received with the item you ordered. Do you have an aftermarket lighting housing? These may not be perfectly fitted for aftermarket bulbs and will require some manual modifications. Q5: Neither side lighting up? Both sides flicker, flash, or work inconsistantly. A:Check the headlight fuses, and then check the ballast plugs to insure correct installation. If this doesn’t work, there may be a voltage problem with the vehicle. You probably just need a relay or capacitor. Q6: WARNING ABOUT POLARITY. Unlike halogen bulbs, LED are polarity sensitive. BEFORE you start your LED kit installation, verify the polarity on your vehicle by simply plugging the LED bulb into your vehicle socket. If your light turns on, please proceed to install both bulbs onto your vehicle. If your light DOES NOT turn on, disconnect the bulb and flip the socket in order to reverse the polarity (this will not damage your vehicle electrical system in any way). Once you made sure the LED bulb turns on, please proceed to install both bulbs onto your vehicle. There is no convention when it comes to polarity. Different car manufactures have different polarity setup, even within the car model the polarity setup on your low beams and high beams might be different. Quantity orders are welcome! Please check with your address before order it. Feedback is very important to us.