Engine Control Module Tuning Chip Fit Jeep Cherokee Jl Kl 2.0T 2.0L 2018 – 2020. Claims: No any proprietary rights, affiliate and sponsorship with the third party marks. For Jeep Cherokee (KL) 2.0T 2019-present Petrol engine For Jeep Wrangler (JL) 2.0T 2018-present Petrol engine. Plug and Play devices, easy to install. Waterproof, dustproof, shockproof and interfereproof. No alteration of the factory wiring loom required. Chip Box hos t. Material: Aluminum alloy L6016-T6. Material: CPA material, industrial grade imported electronic components. Waterproof plug imported from Japan. Contents: 1 main plug + 4 Sensor plugs. Material: German standard high temperature tinned wire. Chip Box host 1 Wire harness1 set 3M paste1 Paste1. Turn off ignition switch. Lock your racecar and wait for 3 minutes. Open the engine compartment cover. Open the engine hood. Find sensor A, take out the original plug, and insert the corresponding chip box plug A. Find sensor B, take out the original plug, and insert the corresponding chip box plug B. Connect the chip box host to the plug of harness set, and find a suitable place to receive the chip box host. Fix the computer and harness with ribbons or 3M pastes. You will get exactly as shown in the picture above. Professional installation is highly recommended Instruction Included. If not, we could offer you the E-book version. 1:What is maXpeedingrods ECU? You can make the most of your car’s potential performance. 2:How does maXpeedingrods ECU work on my vehicle? MaXpeedingrods ECU can be installed on any vehicle with an ECU, which means that it does not permanently change or re-programme the inputs from your vehicle’s original ECU, it simply intercepts the signals changes them as required and sends them to the various engine components, as as to horse power improvement and fuel saving. 3:Can I still use my maXpeedingrods ECU after switching to a new vehicle? We optimize the parameter for the particular engine. If the new vehicle has exactly the same engine, you can unlimited re-use our ECU. 4:Will maXpeedingrods ECU bring harm to my engine? No, it won’t cause any harm. Reprogramming the vehicle’s Electronic Control Unit is risky and you may not revert to the standard settings if something goes wrong;maXpeedingrods ECU has no physical changes made to the engine. The maXpeedingrods ECU Connect system is easy to remove and re-install by simply reconnecting it to your vehicle. 6:Can I install maXpeedingrods ECU easily? Yes, maXpeedingrods ECU is simply installed by connecting to the wires of the original factory E. We supply you worry-free and simple installation, we have pictures and video instructions to help you, you can DIY it by yourself via few easy steps. 7:Can I remove the maXpeedingrods ECU and return my vehicle to series condition? Yes, you can remove it as you wish, and then restore original settings of original ECU. All the parcels will be collected by our carrier at 10:00am AEDST on Monday to Friday. Please be noticed that in the following situations, we are not responsible for any loss caused. Customer/ Consumers signed the package without any checking. Consumers should check the item(s) status in person with the carriers to confirm if it/they is/are in good condition when item (s) delivered to requested place. Customer/ Consumers could refuse to sign the package immediately if packages are damage or missing parts on the spot. We consider that customer/consumer has granted the quantity, appearance, packing and quality of the goods when signed on the spot. Neither does the other compensation for this reason. We don’t provide fitting service. Customers must ask qualified mechanics to install our products and any modification on the products are not allowed. Otherwise, customers are responsible for all loss. There is no problem to return products in terms of unopened, complete, unused. Otherwise, we have the right to refuse the return. Other items you might also like. 6650960099 New Turbine Cartridge CHRA For Jeep Grand Cherokee 170HP 125KW 2.7CRD. Turbo charger 765155 for Jeep Cherokee 3.0 CRD (KK) 160KW OM642 6420900280. REAR CONTROL ARM SET UPPER + LOWER FOR JEEP GRAND CHEROKEE WJ WG 99-01 3.1td. Fuel Pump Sending Unit For Jeep Wrangler 1991-95 1043235 YJ 20 Gallon 2.5L/4.0L. Oil pump fit Mercedes-Benz /Jeep 2.2 A6511802801 A6511810312. Lower Intermediate Steering Shaft Fit For Jeep Wrangler 87-95 52007017AA???? This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Starters, Alternators, ECUs & Wiring\ECUs & Computer Modules”. The seller is “turbochargersno.1″ and is located in this country: GB. This item can be shipped to United Kingdom.

• shipping time to UK notice: 2-4 b.d. from UK
• Brand: maXpeedingrods
• Type: Engine Control Unit
• Reference OE/OEM Number: Plug-In, Plugin, Plug’n’Play units, Plug In Plug and Play ECU, Chip tunning,chip turn,Chiptuning, Electronic Control Unit, Electronic Control Module ECM, Engine control unit, Engine controller, powertrain control module (PCM), Transmission Control Module (TCM), Brake Control Module (BCM / EBCM), Central Control Module (CCM), Chip Box host, Wire harness, 3M paste, Paste, Auto Engine Computer, Engine control unit, engine tuning chip, Performance Chip Tuning, Performance Chip, Chiptuning Box, Chip tuning Box,Power Box, Compute, Chip, Cruise Control, Chip Box
• Other Part Number: For Jeep 2.0T 2.0L 2018-present,
• Balance tested?: YES
• Warranty: 2 Year
• Note: No Instruction Included
• Important Notice: Package Included: Just like the picture, Professional installation required
• Features: Increase 10%~30% HP, Increase 15%~30% lb-ft, Decrease 5%~10% MPG, Plug and Play devices, easy to install, Waterproof, dustproof, shockproof and interfereproof
• Fitment: For Jeep Cherokee (KL) 2.0T 2019-present, For Jeep Wrangler (JL) 2.0T 2018-present
• Notice: NOT Ship to UK zip codes with BT letters and Canary of Spain, NOT Ship to UK zip codes with BT letters also any other islands, It’s aftermarket replcement part
• Manufacturer Part Number: 6DRCWJ